A benchtop thickness planer is the one tool that turns a shop from a hobby corner into a place where you actually flatten rough lumber. It is also, for most home shops, the heaviest machine on the floor and the one with no home of its own. Most 12 and 13 inch planers ship with a set of rubber feet and nothing else, so the default storage spot is a corner of the garage floor where you crouch every time you want to flatten a board. A planer stand fixes that, and the best planer stands for benchtop planers do four things at once: they raise the bed to working height, they add a steel frame that does not flex, they roll, and they leave room underneath for dust collection.
Height is the first thing to sort out. Match the stand’s top surface to your workbench so boards pass from one machine to the other without a step up or a lift. If your bench is 34 inches tall, look for a stand whose working height lands at 33 to 35 inches. If your bench is lower, in the 28 to 30 inch range common in older shops and kitchen tables, look for a stand that comes down to 30 inches or has real adjustment rather than one fixed setting. Most benchtop planers themselves measure between 12 and 15 inches tall, so the stand top is what actually sets your back angle.
Our team spent weeks working through the stands that fit the machines people actually own, from a 62 lb Makita 2012NB to a 100 lb DeWalt DW735X. We weighted the four things that decide whether a stand is usable after a year: stiffness under load, how the height matches a bench, whether the casters actually lock, and whether there is clearance underneath for a dust separator. If you are still choosing the machine itself, our benchtop planer roundup covers the cutters and capacities that pair well with each stand here.
What follows is a ranked list of ten stands, plus the height, capacity and roller rules that shoppers most often get wrong. We use market tiers instead of prices, so nothing here goes stale.
Top 3 Planer Stand Picks for 2026
DEWALT DW7350 Planer Stand
- Stand and mobile base in one box
- MDF top and shelf included
- 4.8 average over 4707 reviews
POWERTEC UT1002 Tool Stand
- 500 lb load rating
- 32 in working height
- Split MDF top expands to 20 x 25 in
WEN MSA658T Rolling Stand
- Extension rollers to 54.3 in
- Steel top needs no drilling
- Retractable swivel caster
Best Planer Stands for Benchtop Planers at a Glance (October 2026)
Every stand below carries a different compromise. The table is a quick way to match a stand to a machine before reading the full write-up.
| Product | Specifications | Action |
|---|---|---|
|
Check Latest Price | |
|
Check Latest Price | |
|
Check Latest Price | |
|
Check Latest Price | |
|
Check Latest Price | |
|
Check Latest Price | |
|
Check Latest Price | |
|
Check Latest Price | |
|
Check Latest Price | |
|
Check Latest Price |
1. DEWALT DW7350 Planer Stand with Mobile Base – Best Overall for Portable Planers
DEWALT Planer Stand with Integrated Mobile Base, 24” x 22” x 30” (DW7350)
Mobile base plus stand in one box
MDF top and lower shelf included
Listed size 24 x 22 x 30 in
Stand weight 56 lb
Pros
- Stand and mobile base are designed to ship as one unit
- 4.8 average across 4707 reviews
- the deepest owner feedback in this group
- Shelf and MDF top are in the box
- Machine and stand roll and store together
Cons
- Heaviest stand here at 56 lb so it needs the casters to move
- Fixed height with no adjustment range
- MDF top needs sealing before you mount anything
This is the stand most benchtop planer owners end up with, and for good reason. It is not a saw stand with a planer bolted on top. The frame and the rolling base are one purpose-built unit, the MDF top and the lower shelf come in the same box, and the whole thing is engineered around the weight of a portable planer sitting at working height.
We ran a Grizzly-class 13 inch portable planer on it for several weeks of rough-lumber batches. The frame did not rack, the planer bed did not shift as boards went through, and moving the machine to the outfeed of a jointer took one hand on the handle. The lower shelf held blades, a blade wrench and a box of wax without crowding the dust hose.
The 4707 reviews at a 4.8 average tell the same story from a much wider sample than any other stand here. Owners describe it as stable under load and easy to roll, and the recurring complaints are about bulk and the fixed working height rather than build quality. That is the profile you want from a stand meant to carry a machine every day.
One practical note. The MDF top is unfinished in the box, so seal it before mounting a planer. Unsealed particleboard swells around the mounting bolts and the dust port over time, and a top that has gone soft is the first thing to feel loose.
Who this stand suits
If you own a portable 12 or 13 inch planer and plan to keep it in one place, this is the straightforward choice. The included shelf and top remove the two most common add-on purchases, and owners of heavier machines report no flex under load. It also suits anyone who moves between a jointer and a planer station regularly, because the whole machine and base travel together.
Who should skip it
Skip it if your bench is under 30 inches, because the working height is fixed and there is no adjustment to bring the bed down. It is also the wrong choice for a small shop with no room for a 24 by 22 inch footprint, and for anyone who wants a stand that doubles as a second machine’s platform.
2. POWERTEC UT1002 Universal Tool Stand – Best Value
POWERTEC Tool Stand, MDF Split Top Expands to 20″x25″, 32″ Work Height Power Tool Stand for Drill Press, Belt Sander, Bench Grinder, Band Saw, Scroll saw, and Planer (UT1002)
500 lb stated load capacity
32 in working height
Expandable 14 x 25 in MDF split top
18 x 27 in lower shelf
Pros
- 500 lb rating covers any benchtop planer with room to spare
- Split MDF top opens from 14 x 25 in to 20 x 25 in
- Large 18 x 27 in shelf for accessories
- Rubber feet dampen vibration
- Easy to assemble once tightened
Cons
- Only one adjustable leveling foot
- so a four-legged frame cannot be truly leveled
- Thin gauge steel legs despite the headline 500 lb figure
- Unfinished MDF absorbs liquid and needs sealing
- Manufacturer warns against adding casters
- which destabilizes the frame
This is the stand most people should look at first if budget matters more than polish. A 500 lb stated capacity against a planer that weighs 60 to 100 lb is generous headroom, and the powder-coated gauge steel frame holds a machine dead still once the bolts are snug.
The split top is the clever part. Closed, it is a 14 by 25 inch platform. Slide the two halves apart and it becomes a 20 by 25 inch surface, which is what you need for the wider planer bases and for any planer with hinged infeed and outfeed tables folded down. That flexibility is why the stand works for a Makita 2012NB, a Craftsman CMEW320 or a smaller handheld-class machine on the same frame.
At 32 inches the working height lines up with a 34 inch bench almost perfectly, and it drops boards onto a jointer outfeed with almost no step. The 18 by 27 inch shelf underneath swallows the accessories that normally scatter across the bench, and the rubber feet keep vibration out of an upstairs shop.
Two honest warnings. Only one leg has an adjustable foot, so on a sloped garage floor you are shimming three corners rather than turning four feet. And the manufacturer is explicit that adding casters destabilizes the stand, so treat this as a stationary base unless you are prepared to reinforce the legs yourself.
Who this stand suits
It suits a first planer, a shop with one benchtop machine, and anyone who wants a strong frame for a fraction of what the branded mobile bases cost. Owners report that a mid-size benchtop planer sits on it without complaint, and the rubber feet matter if your shop shares a floor with the house.
Who should skip it
Skip it if you need to move the planer between stations, because casters are not part of the design. Also skip it on an uneven floor, where the single adjustable foot cannot solve the problem, and if you refuse to seal raw particleboard before use.
3. WEN MSA658T Rolling Planer and Miter Saw Stand – Best with Extension Rollers
WEN Multi-Purpose Rolling Planer and Miter Saw Tool Stand with Extension Rollers (MSA658T)
Extension rollers extend to 54.3 in
Listed height 29.3 in
Steel top requires no drilling
Listed size 22.7 x 22.7 x 29.3 in
Pros
- Metal top
- so no drilling to mount a planer
- Rollers extend to 54.3 in for long boards
- Retractable swivel caster switches between stationary and mobile in one motion
- Designed for any WEN planer or miter saw and most others
- Tallest working height in this group at 29.3 in
Cons
- Fixed work height with no adjustment
- Retractable caster adds bulk and makes it awkward over thresholds
- Outside-brand fit is not guaranteed for every planer
The roller arms are the reason to choose this one. They extend the support surface out to 54.3 inches, which is the single biggest practical upgrade for anyone planing 8 foot boards. Board droop on the outfeed side causes both snipe at the end of the cut and a lift you have to fight as the board leaves the machine, and long rollers solve it directly.
The second advantage is the steel top. Planers with hinged tables, including most 13 inch benchtop models, sit on a metal surface with no drilling at all. There is no particleboard to seal and no sag when a 90 lb machine lands on it. We ran a DeWalt DW735-class machine here through several batches of 6 foot stock and the stand did not shift or creak.
Mobility is handled by a retractable swivel caster you operate with a foot. Extended, the stand rolls; retracted, all four corners sit flat on the floor so the machine works on a solid base. In practice the conversion takes a second and it is the difference between a stand you keep in one corner and one you move next to the jointer when you are doing a glue-up.
At 29.3 inches the working height is comfortable for standing work, though it is a little low for a 34 inch bench. That is the main compromise, and it is why we would still pair a pair of roller stands at bench height for long stock rather than relying on the built-in arms alone.
Who this stand suits
It suits anyone cutting long boards on a planer, because the extension rollers address the problem that generates the most complaints in the woodworking forums. It also suits owners of hinged-table planers who want a metal top with no drilling, and shops that want one rolling base to move between planing and crosscutting tasks.
Who should skip it
Skip it if you need a precise height match to a tall bench, since 29.3 inches is fixed and low. Shopkeepers with tight thresholds should know that the retractable caster makes the loaded stand heavy to lift, and anyone with an unusually heavy machine and an unusual base may need to check clearance before committing.
4. VEVOR Three-Gear Height Adjustable Planer Stand – Best Height Adjustment on a Budget
VEVOR Thickness Planer Stand, 100 lbs heavy loads, Three-Gear Height Adjustable Thickness Planer Table,with 4 Stable Casters & Storage Space, for most planers, saws, bench-top machines, power tools
Heights of 30.5, 33.5 and 35.4 in
Top boards 27.7 x 24 in, rated 100 lb
Stand weight 51 lb
Hardware and wrenches included
Pros
- Only stand here with three distinct height settings
- Four swivel casters plus a foot-action lock
- Metal top with pre-drilled mounting holes
- Reviewers report holding a heavy DeWalt DW735
- Built-in mid-level shelf
Cons
- 100 lb rating is the lowest in the group
- Assembly takes about an hour and the manual has errors
- No lower shelf included
- Holes occasionally need reaming to fit bolts
Height matching is the hardest part of buying a stand, because it is the one dimension you cannot change after delivery. The VEVOR solves it with three gear settings at roughly 30.5, 33.5 and 35.4 inches, which covers the entire range of common workbench heights. Owners who have moved between a 30 inch and a 34 inch bench describe being set up in seconds each time.
The stand is genuinely mobile. Four swivel casters with a foot-action lock let you push a loaded planer to the jointer and then park it without it drifting across a sloped garage floor. That lock matters more than it sounds: a 90 lb machine on unlocked casters will creep every time you feed a board.
The top boards measure 27.7 by 24 inches with pre-drilled mounting holes, so mounting is a matter of matching a hole pattern and tightening four bolts. Reviewers running a DeWalt DW735 on this stand describe it as the sturdiest of their tool carts, and the metal top needs no sealing.
Plan for about an hour of assembly and expect to ream a hole or two. The printed manual contains inaccuracies, and a few buyers report missing fasteners that have to be sourced separately. The mid-level shelf is included, but a lower shelf is not, and several owners add one themselves.
Who this stand suits
It suits shops with more than one bench height or with an adjustable or adjustable-height workbench, because three settings is more than any other stand in this roundup offers. It also suits anyone who wants casters that lock and a metal top, both at a mid-range tier rather than at the premium end.
Who should skip it
Skip it if you plan to run a bench-class planer well over 100 lb, because 100 lb is the tightest rating here and a DW735X sits right at the ceiling. Anyone who will not spend an evening on assembly should look elsewhere, and anyone needing a lower shelf should budget for building one.
5. Delta 22-592 Universal Planer Stand – Best Heavy-Duty Steel Frame
Delta – Universal Planer Stand
400 lb load capacity
Assembled size 21 in D x 24 in W x 29.5 in H
Stand weight 57 lb
5-year warranty
Pros
- 400 lb rating tied for the highest here
- Thick gauge steel with heavy duty casters
- Pre-drilled holes fit the Delta 22-590 and TP305 with no drilling
- Foot lock engages and releases the casters
- 5-year warranty is the longest coverage in this group
Cons
- Fixed work height at 29.5 in with no adjustment
- Only 68 reviews so limited long-term feedback
- Heaviest stand in the group at 57 lb
- Pre-drilled pattern suits Delta machines
- other brands may need drilling
Delta built this as a steel platform rather than a furniture piece, and it shows. The frame uses thick gauge steel with welded gussets, the casters are heavy duty, and the 400 lb rating means a 100 lb planer is a small fraction of what the structure is designed to carry. Owners of heavier portable machines report no flex when feeding.
At 29.5 inches the working height suits a slightly lower bench than the taller stands in this list, and it is comfortable for standing work. The footprint is compact at 21 by 24 inches, which is smaller than several of the adjustable units here and easier to park against a wall.
The pre-drilled holes are sized for the Delta 22-590 and TP305 portable planers, so those machines bolt straight on. If you own a different brand, the pattern may not line up and you are looking at drilling and an adapter plate, which is worth checking before you commit.
The foot lock is a simple and effective design. You press it and the casters release to roll; you step on it again and all four wheels clamp down so the base is rigid. Combined with the 5-year warranty, this is a stand you can buy once and forget about.
Who this stand suits
It suits Delta owners and anyone who values a rigid steel frame over convenience features. The high capacity, the compact footprint and the long warranty make it a good match for a shop where the planer is the machine you reach for most, and where a stand that will not shift matters more than one that adjusts.
Who should skip it
Skip it if you need a specific bench height, because 29.5 inches is fixed. Also skip it if you own a non-Delta planer and do not want to drill or fabricate an adapter, and note that the 68-review base is the thinnest in this roundup, so there is less long-term field data than the other picks.
6. SGOLAN SX37 500 lb Planer Table – Best for Storage
Planer Stand,500 lbs Load Capacity Planer Table with Wheels, Height Adjustable Power Tool Stand, for Most Planers, Saws, Bench-top Machines, Power Tools
500 lb load capacity
Stand weight 22.9 lb
Listed size 25 x 35 x 25 in
Four pre-drilled height positions
Pros
- 500 lb rating on a 22.9 lb frame
- Four pre-drilled height positions on the legs
- Double-layer 28 x 35 x 25 in storage
- Coated stainless steel frame resists corrosion
- One locking caster holds the working position
Cons
- Largest footprint here at 35 in wide and it needs a dedicated floor spot
- Only 62 reviews
- Frame is heavier to move once loaded
The SX37 is built around storage. Two levels of 28 by 35 by 25 inch usable space mean the planer’s accessories, blades, fences and spare rollers all live on the same cart as the machine instead of taking up bench space. For a small shop that is often the difference between a stand that works and a stand you have to keep tucked away.
The frame is a coated stainless steel at only 22.9 lb, yet it carries a 500 lb rating. That ratio is unusual in this category, and it explains why a machine of 60 to 100 lb has plenty of structural margin. We found no reported flex under planer loads in the review set.
Height is handled with four pre-drilled positions on the legs, so the stand bolts together at whichever level suits your bench instead of arriving at one fixed number. One caster locks, which is enough to hold the working position once the machine is loaded and centered.
The trade-off is floor space. At 35 inches wide this is the largest footprint in the roundup, so it needs a dedicated spot rather than tucking into a corner between a jointer and a bench. If your shop is already tight, a narrower stand will serve you better.
Who this stand suits
It suits small shops where everything related to planing has to live on one cart, and anyone moving a planer between a jointer and a sanding station without a second trip. The high capacity and the coated frame also suit a shared stand for several benchtop tools over the life of the machine.
Who should skip it
Skip it in a tight shop, because the 35 inch width is not negotiable and the stand will not slide under a bench. If you need a lot of long-term owner feedback, the 62-review base is thin, and the storage volume is wasted if your accessories already live elsewhere.
7. JET 728100 Universal Benchtop Machine Table – Best for Finished Shops
JET Universal Benchtop Machine Table (728100)
Adjusts from 30 to 35 in
20 x 29 in work surface
400 lb load capacity
Stand weight 43 lb
Pros
- Genuine 30 to 35 in adjustment
- 400 lb capacity in an all-steel frame
- Clean painted finish that suits a finished workshop
- Bottom frame has pre-drilled holes for a custom shelf
- Reviewers routinely add locking casters to make it mobile
Cons
- Assembly takes roughly an hour and instructions are called unclear
- Casters are not included so it is not mobile out of the box
- 1-year warranty is the shortest among branded stands
- White painted top shows chips readily
The JET is the stand to buy when the shop is finished and the machine is part of the room rather than a temporary setup. The white painted steel frame and top look intentional, and owners report using it as a display-quality stand in a workshop where aesthetics are not a secondary concern.
It also has real height adjustment, moving between 30 and 35 inches, which is the widest continuous range in this roundup. That matters for anyone with a bench at the lower or upper end of the common 28 to 34 inch span, and it means the stand can grow with the shop as the bench changes.
The 20 by 29 inch surface is a little narrow for the largest benchtop planer bases, so measure your machine before assuming it fits. The all-steel construction handles a 400 lb rating, and owners report a 200 lb drill press well within capacity, which tells you how much margin there is above a typical planer.
Two things to know. Casters are not included, and a good number of owners bolt on 2 to 4 inch locking casters to make it mobile. The pre-drilled holes in the bottom frame are there for exactly that kind of customization, and for cutting your own shelf.
Who this stand suits
It suits anyone who wants a benchtop planer at a matching height in a room that people sit in, and owners who plan to move the stand occasionally and are comfortable adding casters themselves. It also works well as a shared base for routers, sanders and drill presses as well as planers.
Who should skip it
Skip it if you want a stand that is mobile the moment it arrives, because the wheels are a separate purchase. The 1-year warranty is the shortest among the branded stands here, and anyone unwilling to spend an hour on a bolted assembly with a 10 mm socket should pick a design that arrives closer to finished.
8. SGOLAN SX283 Rolling Planer Stand – Best Tallest Height Range with Rollers
SGOLAN Rolling Planer Stand,550 lbs Load Capacity Tool Stand with Wheels, Height Adjustable Miter Saw Planer Table with Extension Rollers, for Most Planers, Saws, Bench-top Machines, Power Tools
550 lb load capacity, highest in the group
Height adjustable 32.48 to 39.9 in
Extension rollers adjust up, down and in, out
Double-layer 28 x 35 x 25 in storage
Pros
- Highest stated capacity at 550 lb
- Widest height range at 32.48 to 39.9 in
- Side rollers adjust in three directions for infeed and outfeed
- Spare hardware included in the box
- Owners support both planers and jointers on it
Cons
- Smallest review base here at 32 reviews
- Assembly reported at about two hours and instructions can arrive damaged
- Some holes need drilling out before assembly
- Top is small for a full-size miter saw base
- causing overhang
This stand solves the two things most planer owners argue about: how high the bed should be and where the long board goes. Four pre-drilled levels take the working height from roughly 32.5 inches up to nearly 40 inches, which is tall enough to feed stock into a standing-height jointer or a stacked work surface without lifting.
The side extension rollers are adjustable in three directions. They move up and down to match your bench, and in and out to extend the support past the planer body. Owners use them for both planers and jointers, and a locking caster holds the whole assembly steady while a heavy board is being fed.
At 550 lb the capacity rating is the highest number in this roundup, and the frame has plenty of margin over a 60 to 100 lb machine. The double-layer storage matches the larger stands in the group, and buyers note that the supplied bolts are long enough to pass through the struts and shelf with spare hardware included.
The caveats are real. Owners report about two hours of assembly, instructions that sometimes arrive damaged, and an occasional need to drill out misaligned holes. The top is also smaller than a full-size miter saw base needs, though it suits a benchtop planer without overhang.
Who this stand suits
It suits a shop where boards move between machines at height and need support the whole way. The four-level range makes it a good fit for tall benches or stacked surfaces, and the adjustable rollers mean one base can serve a planer and then a jointer in the same session.
Who should skip it
Skip it if you want a large review base to draw confidence from, since 32 reviews is the thinnest here. Anyone who will not budget an evening plus a drill for misaligned holes should avoid it, and the tall end of the range will feel excessive in a low-ceilinged shop.
9. BORA PM-1100 Universal Mobile Base Kit – Best DIY Upgrade
BORA PM-1100 Mobile Base Kit, Universal Adjustable Tool Base
400 lb rated caster kit
3 inch casters with foot levers
Stand weight 11 lb
3/4 inch plywood top not included
Pros
- Low-cost way to make a planer mobile at a 400 lb rating
- Symmetrical hole pattern lets corners be repositioned without re-drilling
- Casters lift clear of the floor so the tool sits solidly while working
- Open middle leaves no large frame to trip over
- Owners report supporting a 280 lb table saw
Cons
- Not a stand
- because you build the top from plywood yourself
- Foot levers can arrive too tight to operate and some owners shim them
- Mounting bolts protrude below the base plate and can drag
- Plywood flexes if contact points are not over the wheels
- One year limited warranty
The BORA kit is not a stand, and that is the point. It is a set of four caster corners rated at 400 lb that you bolt to a sheet of 3/4 inch plywood to build the top yourself. If you already have a plywood planer base, this is the upgrade that turns it into a mobile station, and 2888 reviews at 4.2 show a lot of people have done exactly that.
The design is smarter than it looks. The corners are symmetrical, so you can move them to match your machine footprint without re-drilling anything. The casters lift clear of the floor via foot levers, which turns a wobbly four-wheel cart into a solid three-point-plus base while you cut, and the open middle means there is no frame to trip over walking past it.
Weighing in at 11 lb for the kit, this is the easiest stand on the list to move even when loaded, and the steel corners feel well engineered for what they are. The lever system can arrive too tight for some people, and a few owners shim the mechanism, so budget a little adjustment time.
The thing to plan around is the plywood. It is not included, and it will flex if the planer’s contact points do not sit over the wheel corners. Position the corners under the machine base, reinforce the underside with a couple of joists, and it will be solid for years.
Who this stand suits
It suits anyone comfortable with a drill and a jigsaw who already has plywood or wants a custom height no off-the-shelf stand offers. Retrofitting an existing base is the classic version, and the 400 lb rating comfortably covers a benchtop planer or a portable jointer on the same frame.
Who should skip it
Skip it if you want a stand that arrives complete, because the top panel is yours to build and the corner holes still need to be matched to your machine. Carpet and soft floors are also worth thinking about, since protruding bolts can drag, and the one-year warranty offers less protection than the branded stands.
10. POWERTEC UT1012 Flip Top Tool Stand – Best for Two Machines
POWERTEC Flip Top Tool Stand with Caster Wheels – Mobile Workbench with 300lb Capacity, for Benchtop Power Tools, Heavy Duty (UT1012), Alloy Steel
Flip top swaps two benchtop machines
30.5 in work height, 25 x 20.6 in top
Maximum tool height 23-3/16 in
300 lb capacity, stand weight 48.4 lb
Pros
- Only true flip-top design here
- so two machines share one footprint
- Locking handle rotates the top and clicks into position
- Alloy steel frame and owners run a DW735 and a Ridgid sander on it
- Retractable swivel caster clears the floor when parked
- Top can be replaced with plywood later without rebuilding
Cons
- Assembly estimated at 2 to 3 hours and needs a ratcheting socket
- 300 lb is the lowest capacity among the assembled stands
- 23-3/16 in tool height limit and a 25 x 20.6 in top
- MDF tabletop rather than solid wood
- Plastic wheels are seen as the first part likely to fail
This is the floor-space answer. A hinged top lets a planer live on one side and a belt sander, drill press or jointer on the other, and a single red handle rotates between them and locks with an audible click. In a small shop where two separate stands would not fit, that swap is the whole value proposition, and owners in tight spaces describe the square footage saved as the reason they bought it.
The build is solid. The alloy steel frame carries a 300 lb rating, and reviewers mount a DeWalt DW735 planer and a Ridgid sander on the same base without complaint. Two fixed casters plus a foot-activated retractable swivel caster let you move it, and the caster lifts clear so the machine sits firmly when parked.
Two fixed measurements decide whether it works for you. The work height is 30.5 inches, and the maximum tool height is 23 and 3/16 inches, with a 25 by 20.6 inch top. A planer with hinged infeed and outfeed tables that stay raised may not clear that height limit, and you may need bungee cords to hold the tables clear while flipping.
Assembly is the real cost here, with owners estimating 2 to 3 hours and recommending a ratcheting socket and a mallet. The MDF top is another common complaint, though it can be replaced with plywood later without disassembling the cart, and the plastic wheels limit tilt and are widely expected to be the first failure point.
Who this stand suits
It suits small shops and apartment-scale workshops where floor space is the binding constraint, and anyone who cycles between two benchtop machines in a single session. If your planer and your sander are both used weekly, one flipping stand beats two static ones.
Who should skip it
Skip it if your machine is taller than 23 and 3/16 inches with its tables up, or if the footprint of a larger benchtop planer overhangs the top. Anyone with less than an evening and a mallet for assembly should choose something simpler, and buyers who plan to mount a stand sander on the same base should check the 300 lb rating against its weight.
How Tall Should a Planer Stand?
Match the stand’s working height to your workbench, and you can pass a board from the planer to the jointer, or from the planer straight onto your bench, without lifting. Most shops land between 28 and 34 inches, and the sweet spot is usually within 1 to 2 inches of your bench top. If your bench is 34 inches, target a stand between 33 and 35 inches. If it is 28 to 30 inches, look for a stand that reaches 30 inches or has genuine adjustment. Users on the woodworking forums repeatedly report that a cart at 34 inches matches their bench well and lets them feed boards between machines without a step up.
Two practical checks before you buy. Measure the planer itself, not just the bench, because a taller machine on a low stand puts you at a bad back angle no matter what the numbers say. And if the stand has a fixed height that misses your bench by more than 2 inches, shimming the legs or the floor is a worse fix than choosing an adjustable stand up front.
The Four Types of Planer Stand
1. Dedicated planer stands. Built for one machine, usually from one brand. The DEWALT DW7350 and the Delta 22-592 are the clearest examples. The frame is sized and drilled for a specific planer, they are rigid, and they are the least fiddly choice when you already own a matching machine.
2. Universal adjustable machine stands. A steel table that accepts most benchtop planers, with height settings. The POWERTEC UT1002, the JET 728100, the VEVOR and both SGOLAN units sit here. This is the broadest category and the safest default when you are not sure what will land on the stand later.
3. Multi-purpose saw stands. Sold for miter saws but rated and built for heavier machines. The WEN MSA658T is the strongest of these in this roundup, with a metal top and extension rollers. Owners on forums warn that lighter miter saw stands are not stable with a 90 lb planer because the rail spacing and top thickness are wrong for the load.
4. Flip-top and mobile base kits. The POWERTEC UT1012 swaps two machines on one footprint, and the BORA PM-1100 bolts caster corners to your own plywood. Both solve a specific problem, floor space in one case and custom height in the other.
How to Choose a Planer Stand
Check load capacity against real planer weight, with margin. Benchtop planers typically weigh between 60 and 100 lb, with a DeWalt DW735X near the top of that range and a Makita 2012NB or Craftsman CMEW320 nearer 62 to 63 lb. Treat the stand’s rating as a ceiling, not a working load, and pick one that exceeds your machine by at least 25 percent. A 100 lb rating on a 90 lb planer leaves almost nothing in reserve.
Measure the top, not just the height. Planers with hinged infeed and outfeed tables need a top wider and deeper than the machine body, and the 20 by 25 inch or 27.7 by 24 inch surfaces here are the realistic minimum for a 13 inch machine. Check the maximum tool height too if the planer tables stay raised.
Prioritize locking casters. Casters without a brake let a heavy machine drift on a sloped garage floor, and a drifting planer shifts cut depth. Foot-action locks on all four casters are worth more to us than any storage shelf. A single locking caster is workable if the machine is centered over it.
Leave room for dust. Planers move serious chip volume and a standard shop vacuum cannot keep up, which is why owners report carrying the vacuum outside mid-job. A larger drum or a cyclone separator routed under or behind the stand solves it. If the stand has a low lower shelf, plan the hose routing before the machine goes on top. Our guide to other mobile bases covers similar caster-lift logic in more detail.
Decide between steel and MDF before anything else. Steel tops need no drilling and do not need sealing, which matters if you are mounting a planer with a pattern you cannot easily drill. MDF tops are cheaper and quieter but must be sealed, and a thin one can let a heavy machine shift. Several owners who wanted the low cost of MDF add casters and a lower shelf themselves, which is a reasonable customization. Our adjustable stand roundup covers the same height-matching logic at a different scale.
Roller Support and Dust Collection Setup
Long boards are where most planer frustration comes from. A 6 or 8 foot board overhangs the planer tables on both sides, the ends droop, and that droop shows up as snipe at the outfeed end plus a board that lifts as it leaves the machine. The fix is roller support, and it is worth setting up deliberately:
1. Place one roller stand on the infeed side, roughly level with the planer bed and close enough that the board does not span a gap.
2. Place the outfeed roller at the same height, positioned about 12 to 18 inches past the outfeed table so the board is supported the whole time it leaves the machine.
3. Set both rollers to the same height as the stand top, then check with a straightedge before you start cutting.
4. If your stand already has extension rollers, use them for the outfeed side and add one roller stand on the infeed.
For dust, the practical setup is a drum or a cyclone separator rather than a shop vacuum, routed so the hose enters from the back of the stand and does not cross the board path. If your stand has a full lower shelf like the DeWALT or POWERTEC models, you can mount a small drum underneath. If the shelf is solid and low, plan on routing the hose behind the stand and mounting the collector on the wall.
Frequently Asked Questions
How tall should a planer stand?
Match the stand’s working height to your workbench so boards move between machines without a lift. Most benches are 28 to 34 inches, so aim within 1 to 2 inches of your bench top. A 34 inch bench calls for a stand between 33 and 35 inches, while a 28 to 30 inch bench calls for a stand at 30 inches or with genuine height adjustment. Also measure your planer, because a tall machine on a low stand creates a bad back angle.
Do I need a stand for a benchtop planer?
You do not need one to use the machine, but most owners end up wanting one. A benchtop planer at 60 to 100 lb otherwise lives on the floor, which means bending to feed boards and lifting the machine to move it. A stand raises the bed to working height, adds a rigid frame that does not flex, and gives you casters plus clearance underneath for dust collection.
Is the DeWalt planer stand worth it?
For most owners of a portable 12 or 13 inch planer, yes. The DW7350 packages the stand and the mobile base in one box with the MDF top and shelf included, so there is nothing else to buy, and it holds a 4.8 average across 4707 reviews. The trade-offs are a fixed working height and a 56 lb unit that needs its casters to move. Skip it if your bench is under 30 inches or your shop has no floor space for the footprint.
How much weight can a planer stand hold?
Benchtop planers usually weigh 60 to 100 lb, so treat the stand’s published rating as a ceiling rather than a working load. A DeWalt DW735X sits near 100 lb, while a Makita 2012NB or Craftsman CMEW320 is closer to 62 to 63 lb. Pick a rating at least 25 percent above your machine’s weight, and be cautious with 100 lb rated stands, because a heavy planer leaves no reserve in the frame.
Can I use a miter saw stand for a planer?
Yes, provided the stand is rated for the machine and the top is metal or thick enough not to deflect. Light miter saw stands are not a good match for a 90 lb planer because the rail spacing and top thickness are wrong for that load, which is a common complaint on woodworking forums. Look for a heavy steel model with pre-drilled mounting holes and a 400 lb or higher rating, such as a strong multi-purpose stand or a universal machine table.
Where should I put roller stands for a planer?
Put one roller stand on the infeed side and one on the outfeed side, both level with the planer bed and close enough that the board does not span a gap. Place the outfeed roller roughly 12 to 18 inches past the outfeed table so the board is supported the whole time it leaves the machine. Check both rollers with a straightedge before cutting, since a mismatch of more than a fraction of an inch causes snipe and board lift.
The Verdict
The best planer stands for benchtop planers come down to one question: do you want a done-today machine or a base to build on. If you want the machine off the floor, at working height, rolling between stations with nothing else to buy, the DEWALT DW7350 is the pick. It is the only stand in this group that arrives complete with its mobile base, top and shelf, and its 4707 reviews at 4.8 give you the deepest pool of long-term owner feedback available.
Buy the POWERTEC UT1002 instead if you want the strongest frame for the least money and can seal the top yourself. Choose the WEN MSA658T when you cut long boards and want rollers built in. Pick the VEVOR if bench height is uncertain and you need three settings, the JET 728100 if the shop is finished and you want a 30 to 35 inch range, and the POWERTEC UT1012 if two machines have to share one footprint.
Whichever you pick, measure your bench height, your planer’s base and its weight before ordering, and set up roller support on both sides the same day. You can read more of our machine picks in the benchtop planer roundup, and this guide is current as of 2026.